Advertisements
RSS Feed

Tag Archives: DIY

DIY Rope Towel Holder

Posted on

finished hangerMy son’s bathroom makeover has a beachy feel to it.  (You can see the makeover HERE.)  It’s not done with fish or shells or boats, but it does have white horizontal wall planks and blue/gray walls.  It has that beach cottage-ish look.   The bathroom is finished, except for a towel holder. I could have put the old one back up, but that would have been too easy! (And boring.) 😉

I knew what I wanted to do for the towel holder, but I didn’t know exactly what I was looking for to make it.  I wanted the towel holder to be made of rope with nautical/metal looking hardware to attach it to the wall.  Finding the rope was easy.  The hardware, not so much.  Luckily for me, my Hubby came along on this quest and eventually we found what we needed.

Here’s how it was made…

hardware

Hardware I picked up at Lowes

hardware2

The parts are called: 3/8 inch Galv. Floor Flange, 3/8 inch Galv. Tee, and 3/8 inch Galv. Steel Pipe Nipple

hardware3

Steel Pipe is screwed in to the Floor Flange

hardware4

The Tee is then screwed on to the Steel Pipe

towel holder 2

I cut a thin strip of tape to wrap around the ends of the rope so it would not fray. Then I added glue (E6000) to the openings of the Tee, and pushed the rope ends in.

towel holder 3

I used 4mm Craft Cord to wrap around the rope.

towel holder 4

I wrapped the craft cord around the rope a few times until I got the look I wanted.  The cord is knotted in the back. I cut most of the extra cord ends off, then glued the ends down with more E6000.

finished hanger

The towel holder is attached to the wall with four screw in the Floor Flange.

towel holder 7

DIY Towel Holder – super easy! Cheap to make! Cost less than $20.00 to make two towel holders.

linking to:

Made in a Day
Chic on a Shoestring Decorating

Advertisements

Kitchen Island Ideas

Posted on

I’m in the process of updating the kitchen island. (I’ll have pictures soon.) The thing that is keeping me from finishing completely is color. I don’t know what color to paint it. While white would look clean and fresh, the kids sit there and the wall ends up with marks on it.

Now I’m thinking I want to repaint the sunroom and kitchen while I’m at it.  Amazing how one thing leads to another!  The island is seen from both rooms, so if I repaint the walls, then I may have more color options for the island.  😉

Here are some pictures I found for inspiration.  My cabinets are a honey color.  Any suggestions???

Painted Kitchen Island

Custom Designed Stove Hood Doubles as Pot Rack

Country Combination

Timeless Traditional Island

Arts and Crafts Kitchen

Small kitchen

Chandeliers Add Glamour to Classic White Kitchen

Kitchen with Triple Tier Island

kitchen ideas with island

https://i0.wp.com/planforhomedesign.com/wp-content/uploads/2012/03/Kitchen-Island-Designs3.jpg

Framed Puzzle

Posted on

Our family gift for Christmas from my In-Laws was a beautiful 2000 piece puzzle.  We spent the next two weeks working on it, some days non-stop!  After all that effort and time, there was no way it was going back in the box.  It was going to be framed!

We had a piece of ply wood cut just slightly larger than the picture, then used some puzzle glue to glue the pieces in place on top of the plywood board.  No wanting to buy a frame and glass, I used a frame from a picture I no longer liked.  The frame, unfortunately was too big.  After pondering for a bit, (and honestly the solution should have been instantaneous, but wasn’t!  It’s so embarrassing.) I thought of adding trim to the frame to cover the gaps.

Once my brain started functioning again, it also occurred to me that trim could be added to any frame you wanted to repaint.  Some frames have wimpy moulding for the picture it holds, so adding trim would make the frame look more substantial.  Brilliant I tell you!

puzzle framed before

Here is the picture before the trim was added. You can see on the left and right where the gaps are.

closeup gap

Close up of the problem.

trim being glued

Went to Lowes, and for $10.00, bought two pieces of small decorative trim. I used silicon adhesive to attached the wood to the glass and frame.

closeup trim

The plan was to paint it white and leave it all white. But after several coats, It just look flat and boring.  I ended up sanding it a bit and adding some walnut stain to it.  Much happier now. 😀

after

The sun wouldn’t let me take a good picture (yes, it is the sun’s fault, not the operator of the camera.), but here is the finished picture. Now that the picture is hung with anchors and screws, I think I’m moving it to another location in the house. Thank goodness I’m an expert spackle-er!

 

Fireplace Backsplash Updated

Posted on

Remember when I did the fireplace backsplash?  I updated it a bit.

I have a lot of wood wall planks left over from when I went crazy and bought all I could find because it was on clearance for $3.50.  I bought two different styles.  The planks I used in my son’s bathroom were plain tongue and groove, but I also purchased a couple of packages of the wide beadboard looking planks.

I add the beadboard planks to the fireplace backsplash.  (Nothing stays the same in my house for very long.  It’s a sickness.)

This DIY project was quick and simple! A little extra character for very little money.

This is a picture of the fireplace before and after the first time I did it.

fireplace before

Here’s the now “Before”.

fireplace beadboard taped

I cut the planks to size, then added the first piece to the middle of the fireplace. That way the planks would end at the same place on both sides.  The boards were trimmed length-wise with a circular saw.  I used a nail gun to attach the wood planks to the wall. I just love that thing!

closeup fireplace beadboard

A close up after it was caulked and painted.

fireplace with beadboard 2

The after After! Not a huge difference, but  it looks more finished now. It took one package of wood planks, so it cost only $3.50!  Gotta love that!

Apartment Therapy The Homies 2013

Posted on

I apologize if this is a repeat post for you. I woke up this morning to find my post gone.

homiescrop2113.jpgGuess what?  House of 34 is one of the nominees at Apartment Therapy’s The Homies 2013!  It’s listed in “Best Home Projects and DIY Blog” category.

I would love your vote, if you feel so inclined.  You can vote for House of 34 here.  😀  Thanks!

Model Home Decorating Ideas

Posted on

One of my most favorite ways to get decorating ideas is to go model home hopping.  That means I take my camera and my BFF and we find all the new construction model homes and take a tour.

The best thing to do, if you model home hop, is to be honest with the sales person there.  Don’t pretend to be a potential home buyer.  It’s a waste of their time.  Tell them you are just out looking at model homes for fun and they will leave you alone.  They are actually used to people looking a model homes for decorating ideas.

Here are some pictures I snapped yesterday.  Now I have even more ideas running through my head! 😉

bar

The butler’s pantry in this home is also a bar area.

bathroom cabinet color

I took this picture because I liked the color of the cabinet. Notice the plain, boring mirror on the wall! Tisk Tisk! 🙂

bedroom ceiling

I don’t need to say anything about this photo, but I will… Look at that ceiling!!! Love it.

bedroom wallpaper

The wall behind the bed is covered in wall paper. Makes a great accent wall!

dining room windows

Look at the arched windows in this photo.

dining room

The ceiling in this photo is covered in wallpaper. The back wall is painted a chocolate brown. I’m not a fan of dining rooms, but this is a pretty space.

framed bathroom mirror

This builder did frame out the mirror. Do you see how they added an extra horizontal board?

kitchen eating area

A cute kitchen eating area.

master bedroom

Bright and happy master bedroom.

pool room with wood beams

Beamed ceilings! Ahhh… someday.

red bedroom

In this bedroom, board and batten was used as a headboard effect. This has my head spinning with ideas!

staircase

Beautiful staircase. The dark wood against the white! Love.

upstairs hallway

I took this picture because I like the hallway floor. Although the different levels could be dangerous in the dark! (If you’re me!)

white kitchen

White/Cream cabinets.

hanging kitchen light

Love this lighting over the kitchen table.

island hanging lights

These gorgeous lights are hanging over a kitchen island. I wish I would have asked where they came from.

Have you ever model home hopped?

Winter Blues Will Lose

Posted on

I’m in a battle with the Winter Blues. In an attempt to win this nagging fight, I’m trying to think happy thoughts, smile like the sun is shining and keep my mind and body busy.   Sadly, the Blues have had a chance to stomp on me a few times.  Like Tom Cruise to a couch.  Without the happy dance.

A friend of mine sent me a Daily Inspiration that said, “During the short days of winter, we see less of the sun, but it hasn’t disappeared. The earth has moved, but the sun is still shining bright and clear.”  So I will also remember that the sun is always shining, even when I can’t see it.

If you, too, are a victim of the Winter Blues, maybe these pictures will inspire you to add some happy colors to your winter world.  If nothing else, perhaps it will just make you smile for a moment.

I’m thinking all the doors in my house will be painted these cheery colors shown in the first picture.  What do ya think?  Hubby might wonder what the heck happened to his wife while he was at work, but you know I will be smiling when I watch the expression on his face.  Yep, still a hoot!  Take that Winter Blues! 😉

Le 1er étage, véritable labyrinthe d’Alice au Pays des Merveilles

Happy Doors

open-air tropical style room with white plantation shutters

Colorful Pillows

1. Colorblock Bookshelves

Pops of Color

3.jpg (image)

Cheery Fabric

I love the idea of painting a window frame in a light-colored room.

Window Frame Painted Bright

Nature’s Beautiful Colors

Gorgeous color

Gorgeous Statement Piece

Tumblr_mgqll79unj1rmq48qo1_400_large

Nails in Every Color. (I would do this!)

https://i2.wp.com/25.media.tumblr.com/tumblr_m16sw3l9ke1qi4i5do1_500.jpg

Bright Interior Door

Picture 3

Bold Exterior Door

so happy curtains  <<< love these!  I've never even considered hanging multicolored curtains before... Go figure...  <3~R~<3

Colorful Curtains

Happy rainbow stairs

Rainbow Colored Stairs

Blue cabinets

Bright Hint of Color

Home Decor Ideas with Colorful Interior Design

Vibrant Seating

Bathroom Makeover with Wood Planks

Posted on

I love a bargain!  But finding an accidental bargain is even better!  After the post on Wood Wall Planks, I was psyched to makeover my son’s bathroom.  The day I went to Lowes to finally purchase the planks (I’d been looking at them forever!), they were on clearance!  Instead of $19.99 for a package of four 8 foot planks, they were priced at $3.50 a package!!!  Holy Toledo!!  I hit the mother load!  I bought oodles of them.  More than I needed for this project.  For $3.50 each, I couldn’t help myself.

So, for less than $20.00, I paneled the bathroom walls.

before5

The “BEFORE”. This bathroom is a “Jack and Jill” room. It has doors to two bedrooms and a separate door for the toilet and shower.

before2

Plain boring walls.  And it has a huge, ugly “builder’s” mirror.

plank1

The wood plank is EverTrue Edge V-Groove, Primed.  As you can see, I decided to use them horizontally.  It looks casual, beachy and more “boy” I think.

plank lightswitch

I used a jigsaw to make cuts for light switches and electrical plugs.  Although, when my brother was here, I asked him in my charming sisterly way if he would do some cutting for me.  He comes in handy.

compressor

I asked for a nail gun with a compressor a year and a half ago for my birthday. This project was the first time I used it. Let me tell ya people… it was so easy and so much fun!

nailer

Love the nail gun! It made holes so small that when I painted the planks, the paint filled in the holes. No spackling!

finished3

The white molding on top of the wood planks gives the wall a finished look.

After the planks were up, I caulked all the edges and painted the planks a glossy white.  Then I painted the upper walls Wedgewood Gray, a Benjamin Moore color that Lowes colored matched.  Once the Wedgewood Gray was dry, I added trim molding to the top of the wood plank.

glue on mirror

I used lattice board to frame around the mirror.  It was stained first with MinWax Wood Finish in Expresso on both sides.  The boards are attached to the mirror with clear silicon. Because the mirror is attacked to the wall with clips, I used this method to get the wood to lay flush on the glass.  Since I don’t like “permanent” I did not want to glue the mirror directly to the wall.

mirror taped2

Painters tape is your friend when you need extra hands!

top mirror trim

The trim I used to cap off the planked wall is the same trim I used for the top trim on the mirror. I just bought a piece that was unfinished so I could stain it, instead of the pre-primed trim I used on the wall.

finished1

The AFTER. I can’t tell you how many pictures I took, and how many settings I tried, to get good pictures.  (I didn’t succeed.)  Taking pictures in a room with no windows and six light bulbs is challenge!

finished2

I know it will be too much to ask my son to keep these “pretty” towels in the basket and to use the old ugly ones for his hands. Boys don’t understand “they’re just to look at”. Oh well. They are neat and pretty today. 😉

finished5

All done! If you need any wood wall plank, I have oodles I’ll sell you for as little as $19.99. 😉

before and after

Linking  to:

Personalized Entryway Organization

Posted on

A year and a half ago, I created this entryway at the back door in an attempt to have some sort of organization and control over coats and backpacks. It works sometimes. Sometimes not so much. But now the wall has everyone’s initials attached to their designated space, so I am positive this personalized touch will have everyone hanging up their coats with a great big smile on their face.  Right?  Or not.

But at least it looks cute. 😉

before initials2

Some coats are hanging here, others are everywhere else.

closeup initial

Found these metal initials at Hobby Lobby. I got them 1/2 off that price!

Initial glued and taped

I attached the letters to the wall with Loctite Power Grab for Molding and Paneling. (Had some left over from a project I’m excitedly working on!)

Initials closeup

Cute, huh?

Initials after

You’d hang your coats here right? Could you please tell my kids?

Tomato Basil Parmesan Soup Recipe

Posted on

Happy Friday!

This recipe for Tomato Basil Parmesan Soup was found by my good friend, Crys, who is also my Pilates torturer instructor.  (I will post the source as soon as I find it!)  She has a blog called Dancing Moon Pilates where she shares her inspirations, recipes, fitness tips and DIY projects.  Crys is also my thrifting, antiquing, home improving buddy, a.k.a. partner in crime, when it comes to home projects.  She’s an AWESOME cook too!  Check out this soup recipe.  It looks delicious!

From Crys at Dancing Moon Pilates:

Since it is winter (even though it’s going to be 70 degrees this weekend) I thought a soup recipe would be a good one to start with. Growing up one of my favorite comfort foods  was always a Grilled Cheese Sandwich and Tomato Soup. As an adult I still love the meal but prefer a more “grown up” version of the soup. This delicious recipe requires a slow cooker. Enjoy!

Tomato Basil Parmesan Soup in the  Slow Cooker

Makes about 2 quarts (about 8 servings)
2 (14 oz) cans diced tomatoes, with juice
1 cup finely diced celery
1 cup finely diced carrots
1 cup finely diced onions
1 tsp dried oregano or 1 T fresh oregano
1 T dried basil or 1/4 cup fresh basil
4 cups chicken broth
½ bay leaf
½ cup flour
1 cup Parmesan cheese
½ cup butter
2 cups half and half, warmed 
 (or skim milk if you’re trying to cut some calories)
1 tsp salt
¼ tsp black pepper

1.  Add tomatoes, celery, carrots, chicken broth, onions, oregano, basil, and bay leaf to a large slow cooker.

2.  Cover and cook on LOW for 5-7 hours, until flavors are blended and vegetables are soft.

3.  About 30 minutes before serving prepare a roux. Melt butter over low heat in a skillet and add flour. Stir constantly with a whisk for 5-7 minutes. Slowly stir in 1 cup hot soup. Add another 3 cups and stir until smooth. Add all back into the slow cooker. Stir and add the Parmesan cheese, warmed half and half, salt and pepper.  Add additional basil and oregano if needed (the slow cooker does a number on spices and they get bland over time, so don’t be afraid to always season to taste at the end).

4.  Cover and cook on LOW for another 30 minutes or so until ready to serve.

Wood Wall Planks

Posted on

Have you ever walked around a home improvement store and see something you didn’t even know you wanted?  A project you hadn’t thought of before and suddenly a light goes off and you think “Where have you been all my life”?

It happened to me.  What was the object of my desire you ask?  Wood wall planks!

I know, they’ve been around forever, but it never occurred to me to think about the possibilities.  I have a couple of projects on my radar at the moment; redoing my son’s bathroom and doing something with the kitchen island.  I think I just found my inspiration!

Dark wood paneling

I absolutely adore navy blue! How beautiful is this!?

Love the horizontal paneling

Horizontal! Oh the possibilities.

an idea of what i am looking to do with beadboard paneling in the bathroom - like the trim on the top

bathroom mirror ideas for a small bathroom

full bath after remodel with MDF on sides of tub

Happy is in the House

Posted on

I started out 2012 with the blog name Ode to my Abode.  This past year I changed it to House of 34.  I wanted to share more than just DIY projects.  House of 34 is about sharing ideas and experiences, laughing and making fun of myself (and occasionally others, all with love of course), as well as DIY Projects.  My goal in writing about my DIY projects, though, is to encourage you to try new things yourself.  I’m not an expert at anything.  But for reasons not yet known, 😉 I’m not afraid to try anything either.  I believe if you have an idea in your head, you can do it.

Thanks for all your support!  Blogging has been a wonderful experience.  I have “met” some pretty awesome people in cyberspace! 😀  House of 34 is a happier place with all of you in it.

Thought I would share some of the top posts from 2012.  Thank you again!!

Top Five DIY Projects

Framing a Bathroom Mirror

Storage Cabinet Makeover

Arm Chair Makeover

Entryway Curtains

Entryway Curtains

Painted Architectural Pediment

Most Popular Humor Post

Pinned Image

Most Popular Wednesday Wisdom

Wednesday Wisdom

DIY Twine Christmas Trees

Posted on

I know it’s not Thanksgiving yet, but I’m already making/thinking Christmas decorations.  Tis the Season ya know!

Making Christmas trees is one of the easiest projects to do.  Last year I made these trees from Styrofoam and yarn.

This year I want to add some “natural” looking decorations.  I had twine.  I had Mod Podge.  I did not have Styrofoam trees.  Below you can see my “rough” tree form.  I use plastic sheets I bought for some reason that is no longer in my memory.  It’s the stuff used to make crafts with yarn and a needle.  Anyway, I folded it in a cone shape and used duct tape to hold it together.  Not pretty, but it worked.

My supplies. I had all these things already so technically, it was a “free” project. 😀

I started at the top of the cone, using a paperclip to keep the twine in place. (Yes, that is paint on my hand. Earlier that day I painted my parents garage.)

Still going. It really doesn’t take long at all. I wanted to keep the twine close together, but you can leave gaps if you prefer that look.

When I got to the end, I used another paperclip to hold the twine in place at the bottom.

I placed the tree on top of a glass to glue. That way I can spin the cone around without getting messy with glue.

Using a sponge brush, I “painted” the cone with Mod Podge.

I really put the glue on thick, then left it overnight to dry. Once try, I pried it away from the plastic cone form. And that’s it. I made another tree the same size, and one larger using a larger form.

They look great grouped together. There’s a lot you can add to these. Before the glue dries, you can add glitter or snow flakes. Glue small ornaments, buttons, or add ribbon. Options are endless.

The twine was purchased at Lowes awhile ago. I made these from the same spool and have oodles of twine left. Oooh the possibilities!

 

Linking to: Christmas craft

DIY Hand Painted Wood Sign

Posted on

Happy Friday!

Last weekend, a couple of my girl friends and I went to a big antique show.  It was so exciting!!  (I will have to do a blog on the crazy things I picked up.)  Towards the end of the day, we came across these cool wood doors.  Piles of them.  For only $2.00 each!  I picked up eight of them without having an idea what I was going to do with them.  (That happens a lot!)

One of my friends suggested making hand painted wood signs for the Holidays.  Here’s how I did it.

I printed out the words I wanted to use.  Not having tracing paper, I just took a regular pencil and scribbled on the back side of the letters.  Then I traced the outline of the letters and the pencil mark transferred to the wood door.  Woohoo!

Now the tricky part for me was filling in the letters.  I only had paint and a paint brush, reading glasses and one working eye!  Depth perception is not my strong point!  It took me FOREVER to paint the letters.  Either I thought I was touching the wood with my paint brush and wasn’t or I aimed for the outlines and completely missed.  If it wasn’t so frustrating, it would have been comical!  I would strongly suggest a paint pen.  I didn’t have one.  And two working eyes would be helpful too. 😉

I should mention that before I painted the letters, I gave the center section a coat of off-white chalk paint.  (I still didn’t know what design I was doing at this point.)  After the letters were painted on, I painted the rest of the front with the chalk paint.  Then I taped off diagonals lines with blue tape and painted them red.  After the red paint dried, I sanded everything to distress it a bit then I applied a light-colored wax to seal it and age the off-white paint a little more.

And here it is… This House Believes.  And this house also believes you can Do-It-Yourself.  Had to throw that in! 😉  Just FYI… Doors in many different shapes and sizes can be found at your local Habitat Restore.  Some used, some new, and they cost very little.

I’m going to put eye hooks in the top edge of the sign and use either ribbon or a small chain to hang it outside the front door.  Maybe embellish it a bit with Christmas picks or decorations.

This was really an easy project to do!  And the first Christmas thing I’ve done so far.  I love the Holidays!  Have you started to think about decorating for the Holidays yet?

Painted Architectural Pediment

Posted on

I have been looking for an old architectural pediment to hang over the bookcases in my “dining room turned office“.  I found this piece at an antique store. I have no idea what it was in its previous life.  But that’s okay… it was only $10.00 and just what I was looking for. 😀

I didn’t paint it right away.  I don’t know if you know this about me, but I tend to change my mind a lot once in a while.  It sat for some time before I decided to go ahead and paint it.  You just never know when another bright idea will pop in your head.  I had to be sure.

The BEFORE

Before painting, I gave the piece a light sanding, then wiped it down.

I used two coats of Annie Sloan “Old White” chalk paint.

After the paint dried, I sanded the entire piece again, concentrating more on the edges for a distressed, aged look.

I love how easy Annie Sloan chalk paint is to sand!  That’s it.  It literally took only a couple of hours to complete.  I’m not a patient painter, so there are no hours or days between paint coats for this girl.  If it feels dry and it needs another coat, then it gets another coat. If the second coat feels dry, and it needs to be sanded, then it gets sanded.  Yes I am a DIY Rebel. 😉

Now it’s hanging above the bookcases in my “Dining Room turned Library“.

Finding a “one of a kind” makes antiquing and thrifting so much fun!

This Loon has been in the family for almost 100 years. My daughter admired it at my in-laws house in New Hampshire. Somehow, it managed the long trek to my house where it now resides for all to see. Obviously I need to teach my daughter to admire a 100-year-old piece of furniture, not a century old bird! I will work on that! 😉

Linking to: House on the Way mop it up mondays {nifty button}

DIY Entryway Table

Posted on

Part of my entryway update was making a new entryway table.  Yes, I could have bought one quite easily, but what fun is that?  I had a piece of wood I picked up at Lowes, probably six months ago.  This past Monday, I went antiquing with my parents and picked up 7 spindly legs for $20.00.  Not too bad!  It was just what I was looking for.  So I went to work.

Before I begin, I just want to reiterate that I’m not an expert at wood working or building things.  I just want to do it, so I do.  I don’t follow rules (except wear safety glasses at all times and keep your hands away from sharp spinning blades!!!).  Maybe it’s not that I DON’T follow rules, I just believe there ARE NO rules when it comes to creativity.  If you think you can, you can!

1 ft x 4 ft knotty, butcher block looking wood from Lowes.

The first thing I did was stain the board.  I used MinWax Wood Finish in Expresso.  I stained the wood before I really knew what I was going to do with it.  It may be better to wait until you have your project assembled before you stain.

I picked up inexpensive base moulding at Lowes to use as trim around the raw edges of the table top.  Take a look at all the trims and mouldings home improvement stores have.  Just because the sign says this is a chair rail or this is a base board doesn’t mean that’s what they are ONLY for.  The possibilities are endless!

Look at that edge! Love it when cuts work out the first time. 😀  I used a miter saw but a miter box will work as well.  I glued the trim to the edges of the table, using blue tape to hold it in place. Once the glue was almost dry, I hammered in small brad nails for added support.

Here’s the tools and products I used.

If you are going to drill inside your house, I suggest putting a piece of scrap wood under the wood you are going to drill through. You don’t want to have to explain why there is a hole in your floor. 😉

Ok, So the rest of the construction happened in my entryway.  The garage was too hot.  While I love working with wood and tools, I don’t necessarily think one should have to sweat to create.  Just don’t tell my Hubby I used our front entryway as my workshop. 😉

For the size of the legs I was using, I measured 3/4 inch from the edge of the table to find the center where I needed to drill for the leg hole.

I drilled deep enough to just go through to the other side of the table top with the point of the circle drill bit. Then I flipped the table top over and used a countersink drill bit to drill a hole for the screw that would attach the leg to the table.

I drilled a hole in the bottom of the table legs. The legs have a notch that fit into the holes I drilled under the table. I added glue to the hole, placed the leg in and then used a flat head screw in the countersunk (is that a word?) hole to attach the leg to the table.  Sorry I don’t have a picture of that.

The table is so lightweight that I didn’t need to add any extra support for the legs.  The glue and screws were all the legs needed to be sturdy.  But please don’t come over and sit on it.  I can not guarantee your bottom will remain on the table and not end up on the floor.  😉  Wood putty was used to fill the holes on the top of the table and once that was dry, I swiped a little stain over the holes.  I stained the trim around the table in the same finish as the top and the legs are painted with Anne Sloan paint.  The legs were sanded lightly for a worn look.

And here’s the finished table. I’m kind of diggin it! 😀

So with just four legs, one piece of wood and some moulding and you can have yourself a table!  What do you think?  I think if I can DIY, you can DIY!

Entryway BEFORE and AFTER

Linked to:   mop it up mondays    {nifty button}    I Heart Nap Time  House on the Way  The Girl Creative   Photobucket  Homemade Projects ~ Add Yours! {10-30}Home Stories A2Z  Primitive and Proper

Entryway Curtains Revealed

Posted on

About a month ago I did a post on Entryway Ideas.  I was looking for ideas and inspirations to update my empty foyer.  And I asked you to give me your opinions on the pictures I found.

The majority of you loved the idea of using drapes at the front door.  It was a look I never would have thought of had I not seen a picture on Pinterest.  I loved it too!

Entryway Curtains

Houzz via Pinterest

Entryway Curtains

Southern Living via Pinterest

I picked up a set of drapes at Ikea.  Ikea sells curtains/drapes at crazy, ridiculous, cheap prices.  And they come in a package of TWO!  A pair!  You don’t have to buy two packages to cover one window.  They come long and unhemmed so you can customize the length to fit your window.  It’s brilliant!  These look like linen and were only $20.00!

Entryway Curtains

The “Welcome” wall art came from Hobby Lobby. $14.00 with a coupon.

Entryway Curtains

I bought the rod at HomeGoods for $14.99. The knobs holding back the curtains were $2.00 at Hobby Lobby.

Entryway Curtains

Entryway is complete. The console table is a DIY creation. More on that soon. 😉

What do you think?  Something you might try?

Transform a Room with Paint

Posted on

When we first moved to this house nine years ago, I gave my daughter the smallest bedroom because it has a private attached bathroom.  She’s a girl.  We need our privacy.  But a couple of years ago, she moved into the biggest bedroom so she could have more room to play.  The bathroom attached to that room is a “Jack and Jill” bathroom shared with her brother.  Now that she’s a “tween” it has come to her attention that sharing a bathroom with a boy is gross.  (Yes it is, dear, welcome to the world.)  So she moved back.

Of course we needed to repaint.  She has changed her mind after all.  (I wish I knew where wanting to change things all the time comes from???  It’s exhausting. 😉 )

She picked the color purple.  This room has a chair rail, so that gave me the opportunity to NOT paint the WHOLE room purple.  We chose a creamy white for the bottom half.  I have to say the purple scared me a bit, but now that it’s finished, I love it.

The power of paint is amazing.  It’s happy, and easy and inexpensive!  And you can Do-It-Youself. 😀

This room was my “sewing/craft room after my daughter left for the bigger room. I did a wall paper scrap collage on one wall. I liked it at the time, but after she moved back, it had to go!

Wall paper down! Even if you prep your wall, wall paper is never a joy to remove. Looks better already!

Isn’t it a happy purple? The room looks more like a “tween” girls room now. And just a note of proudness… my daughter spackled all the holes in the room herself before I painted. She did an excellent job! Perfect the first time. My heart is full of pride!

The only thing I purchased besides paint for this room redo is the comforter. I couldn’t resist the cheeriness and grooviness of it!

This desk is a Habitat Restore makeover. I picked it up awhile ago for 30.00. The chair is also from Habitat. Nothing was done to it besides a little glue on the legs and a new cushion.

 

DIY Cake Stand

Posted on

Have you seen the DIY cake/dessert stands made from a candle holder and a plate?  They are so easy!  Get yourself a candle holder, a plate and adhesive (I used E6000) and you’re good to go.

I’ve been wanting to make one of these since last Christmas when I was thinking about handmade gifts.  I never did make any last year, but I just found a rogue candle holder I picked up from Target quite some time ago and while I was at HomeGoods this week, I picked up an inexpensive plate.  I probably spent less than $9.00 total.  Not too shabby!

I chose a neutral colored plate so I can use the stand anywhere in the house I want, but HomeGoods has oodles of beautiful colored plates starting at just $2.99.  Holiday plates are out now, so you could make a cute Thanksgiving and Christmas plate stand.  They’d make great hostess, Bunco, office party or teacher gift.  Especially if you filled the plate with homemade cookies! 😉

Glass, metal, plastic or wood candle holders can be used as the plate stand.  Cake stands, once glued together can be spray painted a solid color for a cohesive look.  This could be addictive.  Friends and family… you may be looking at your next Christmas gift! 😀

Candle holder for Target

Plate from HomeGoods $3.99

The multi-purpose cake stand… Soap dish, Holiday decorations, Dessert stand, Keeper of keys, phone, glasses, etc.

Linked To:

Halloween Burlap Pillow Tutorial

Posted on

Here’s a quick and easy Halloween burlap pillow tutorial.  My friend, Janet, made these cute pillows for her front porch.  All you need is burlap, a sharp marker and a sewing machine.  (Although you can always hand stitch them if you don’t have a sewing machine.)  Enjoy!!

Burlap Pumpkin Pillow

Burlap Pumpkin Pillow

SO CUTE!!

%d bloggers like this: